Loading... Please wait...
Categories
New Products
- Home
- Industrial
- True Brand Air Tool Treatment
- Home
- Buy Products Now
- True Brand Air Tool Treatment
True Brand Air Tool Treatment
Product Description
True Brand Air Tool Treatment with PTFE - Quart
Same Product as our True Brand Small Engine Treatment - Labeled for both
Air tools operate at extremely high RPMs with minimal lubricating fluid. The corrosive attack of moisture from compressed air causes cavitation of bearing and working surfaces. Gumming of blades and vanes result in reduced RPMs, loss of torque and expensive repair costs. Neglect and lack of regular lubrication can lead to premature air tool failure.
The solution to expensive air tool repair costs
True Brand ® Air Tool Treatment is designed to protect FRICTION surfaces. PTFE will fuse itself to these surfaces helping Extend Life! This substitute
surface is similar to “wet ice on wet ice” creating less heat and less friction.
Comparing QMI Air Tool Treatment with typical air tool lubricants
| QMI Air Tool Treatment | Typical air tool lubricant | |
| Application |
PTFE “treatment” applied only as needed by operator. | Regular application required. |
| Longevity |
Slick, tough PTFE resin protection only lessened by abrasives. | Lubrication frequently vulnerable to working conditions. |
| Moisture | Completely resistant to hydrolysis, provides barrier to moisture permeation. |
Vulnerable to moisture permeation. |
| Corrosion | Chemically inert, shields working surfaces from corrosion, cavitation and premature failure. |
Vulnerable to moisture’s corrosive attack. |
| Inventory | One product services all applications and conditions. |
Specialty lubricants needed for specific applications and conditions. |
Features / Benefits
- True Brand ® Air Tool Treatment reduces heat ,wear, and friction.
- True Brand ® Air Tool Treatment formula uses a heavy molecular weight PTFE making it more durable.
- True Brand ® PTFE Treatment does not react to other chemicals because it is chemically inert.
- True Brand ® formula fuses to the asperities of the metal easier because of the sub-micron particle size. (starting at .05)
- True Brand ® bonding agents are designed to “fuse” the PTFE into the friction sur-faces.
- True Brand ® “Increase—Decrease” PTFE is unique because when you increase load or add pressure friction is decreased.
Application / Directions
- Apply through air inlet or oil plug. (Several Drops)
- Operate tool immediately.
- For sluggish tools: Apply adequate treatment to free gummed up vanes and blades, then RAISE the R.P.M. (Repeat if necessary).
- True Brand Air Tool Treatment is compatible with all types of Air Tools.
