|
|
QMI PTFE
Treatment Concept |
| |
| QMI protects
metal-to metal friction surfaces with fused PTFE treatment, like "wet
ice on wet ice," a substitute wear surface that reduces heat while
increasing energy efficiency and prolonging life and trouble-free
operation. The PTFE treatment is permanently fused and chemically
inert, providing protection against corrosive attack on vital parts
and reducing wear as much as
50 to 90%. Only dirt and other abrasives
remove the PTFE, therefore treatment usually lasts over 50,000 miles
or 1,000 hours in typical use automotive engines, and longer in
over-the-road or stationary engines and industrial applications with
less exposure to abrasives. |
| |
| Safe,
effective protection |
| QMI, a
manufacturer committed to advanced PTFE treatment technology, provides
PTFE that suspend easily in carrier oils and pass readily through
standard filters. Many years of product development efforts produced
SX-6000, a metal preparation, blending, suspension and bonding formula
exclusive to QMI, with specialized PTFE especially chosen for higher
tensile strength and greater fracture resistance. |
| |
 |
| |
| Also,
QMI PTFE
treatments do not contain chlorine or other potentially harmful
components and do not compromise oil characteristics or component
critical tolerances. QMI Engine Treatment is
Sequence III E tested safe and
effective, and meets engine manufacturers' warranty requirements.
|
| |
|
return to top |
| |
| |
 |
|
 |
