RMI-25 Cooling System Treatment

New Manufacturer, New Look, Same Product

• RMI-25 makes engines run cooler, greatly prolonging engine life

• One easy application - just pout some in your radiator and drive away

• One 8 ounce bottle treats 5 gallon capacity radiator

Cleans . . .       radiators, engine blocks, heater cores, hoses...the complete system

Inhibits . . .     rust, build-up of mineral deposits, cavitation erosion, electrolyisis and pitting

Lubricates . . . thermostats, water pump seals and heater controls

Conditions . . . improves heat transfer

Flushes . . .     power flushes in combination with your water pump while you drive

Stabilizes . . .  contains a pH stabilizer for acid-alkaline balance

Detects Leaks contains a leak detector which pinpoints leaks under a black fluorescent lamp

RMI-25 protects your engine.

The engines in heavy-duty trucks and other industrial equipment generate enough heat to melt down the engine block and related parts. If an engine's cooling system cannot dissipate that heat because of corrosion or deposit build-up, serious damage can be done to internal engine parts. Repairing that damage costs you money - both in expensive repairs and in lost revenues from downtime.  RMI-25 is a low-cost, effective safeguard against cooling system failure. It cleans while you drive; inhibits rust, cavitation erosion, electrolysis and pitting; lubricates water pump seals and thermostats; and improves cooling. RMI-25 should be at work always in every water-cooled engine.

Power Flush - While You drive

RMI-25 and your water pump make an unparalleled combination for cleaning your entire cooling system.  Vehicle water pumps circulate from 2,500 to 9,000 gallons per hour, depending on the size or make of your vehicle. By just adding RMI-25 to your radiator, your water pump becomes a powerful cleaner, circulating thousands of gallons of cleaning solution through your engine cooling system while you drive.

And this automatic Power Flush requires:

• NO draining and flushing
• NO downtime, no shoptime, no labor costs
• NO loss of antifreeze/coolant
• NO 30-to-40-minute engine run time
• NO harm to skin or eyes or to the environment
• NO coolant gel problems

Just pour some in your radiator and drive away.

Remove 'em all the Easy Way

• Mineral Deposits  --  Corrosion  --  Rust

They're the major factors in engine overheating

Just 1/16 inch of mineral deposit on 1 inch cast iron is equivalent to 4 1/2 inches of cast iron, reducing heat dissipation by 40%.  Corrosion deposits of any kind raise the engine operating temperatures.  A spot of rust raises the temperature inside an engine as much as 700 degrees, causing hot spots and loss of cooling efficiency.  RMI-25 cleans your engine cooling system's metal surfaces, then protects against cavitation erosion, electrolysis, pitting and further corrosion. RMI-25 promotes cooler operating and higher efficiency - and it does it while you drive, with no labor costs.

Antifreeze/Coolant is Only Partial Protection

Everyone knows an engine needs water and antifreeze/coolant to protect it from freezing and boil-over.  But worn out antifreeze/coolant can actually damage an engine even though a hydrometer shows it has plenty of protection left against freeze-up and boil-over.  Antifreeze requires changing only because the inhibitors against rust and corrosion dissipate, the "freeze-up" protection doesn't wear out.  RMI-25 extends the life of expensive antifreeze by replacing the inhibitors - and you still are protected against freeze-up. At the same time, RMI-25 gives you all the other protection against cavitation erosion, electrolysis and pitting, as well as lubricating water pump seals and stabilizing pH.

Treat yourself to savings three ways with RMI-25:

1. Save on the cost of new antifreeze!
2. Save on the cost of hazardous waste disposal!
3. Save 80% on water filter replacements!