QMI GEAR TREATMENT – CONCENTRATE WITH PTFE

— Synthetic, heavy duty treatment

Benefits

• Reduces friction and wear • Increased component life
• Reduced heat and stress • Improved performance
• Reduced maintenance • Easier shifting
• Reduced energy consumption • Reduced noise
• Protection against corrosives • Longer oil life

QMI PTFE Treatment Concept

QMI protects metal-to-metal friction surfaces with fused PTFE treatment, like “wet ice on wet ice,” a substitute wear surface that reduces friction, wear and heat while increasing energy efficiency and prolonging life and trouble-free operation.

• After application, the lubrication system carries QMI to lubricated friction surfaces.
• QMI’s metal preparation chemistry’s surfactants reduce surface tension of gums and varnish on friction surfaces, preparing the friction surfaces for PTFE treatment.
• QMI’s bonding agents work with mechanical action to fuse micro-thin PTFE treatment onto friction surface high points.

Now friction components glide by each other on long-lasting PTFE protection, reducing wear as much as 30 to 90%.

Safe, effective protection

As a manufacturer committed to advanced PTFE treatmenttechnology, QMI provides PTFE that suspend easily incarrier oils and pass readily through standard filters. Manyyears of product development efforts produced SX-9000, ametal preparation, blending, suspension and bonding formulaexclusive to QMI, with specialized PTFE especiallychosen for higher tensile strength and stiffness, greaterfracture resistance and improved flex life strength and life.

Also, QMI treatment utilizes chemically inert PTFE, does notcontain chlorine or other potentially harmful components,does not compromise host oil characteristics or component
critical tolerances. QMI is safe and effective, and meetsmanufacturers’ warranty requirements.

Applications

Manual transmissions, differentials, transfer cases, reduction gears, steering boxes and virtually all gear boxes for automotive, truck, industrial, construction, farm and marine applications.

Suitable for limited slip differentials.

Do not use in automatic transmissions.

Directions

1. Drain enough oil from gear box to allow addition of the recommended amount of QMI Gear Treatment. (See Usage Ratio below.) If gear box oil is dirty or due for replacement, drain and refill with new oil, less amount of the QMI product.
2. Shake well and add to gear box.

Usage Ratio

10% QMI to 90% oil capacity.

(This is a friction-surface metal treatment, not an oil treatment.Therefore, reduce QMI ratio for gear boxes with largereserve oil capacity.)

Characteristics*

Boundary Lubricant .......................... PTFE
SAE No. .................. 75W-90 Full Synthetic
Flash Point ......................... 400° F / 204° C
Pour Point ........................... - 45° F / - 45° C
Gravity, API........................................... 27.5
Viscosity (ASTM D-1298)
cST @ 40° C………………………..130
cST @ 100° C……………………… . 17
Viscosity Index (ASTM D-2270) .......... 142
API Classification ..................... GL-5, MT-1
* Characteristics apply to carrier oils, and may vary slightly.