QMI AUTOMATIC TRANSMISSION TREATMENT with PTFE

Benefits

• Reduced friction and wear          • Enhanced shifting
• Reduced heat and stress            • Improved performance
• Reduced costly repairs               • Increased component life
• Reduced energy loss                  • Increased resale value
• Rejuvenate seals                       • Longer ATF life
• Keep control mechanisms operating freely

The Problem

Automatic transmissions are complex systems that operate under high temperature and stress. Survival demands that all components function freely—the torque convertor, planetary gears, bands and clutches, shift valves, servos and accumulators, governor and modulator. Malfunctions bring power loss and poor fuel economy. Repairs are costly.

The Solution

Optimum lubrication is needed to keep your automatic transmission running trouble free. QMI protects metal-to-metal friction surfaces with fused PTFE treatment, like “wet ice on
wet ice,” a substitute wear surface that reduces friction, wear and heat while increasing energy efficiency and prolonging life and trouble-free operation.

• After application, the lubrication system carries QMI to lubricated friction surfaces.
• QMI SX-6000 metal preparation chemistry’s surfactants reduce surface tension of gums and varnish on friction surfaces, preparing the friction surfaces for PTFE treatment.
• QMI’s SX-6000 bonding agents work with mechanical action to fuse micro-thin PTFE treatment onto friction surface high points.

Now friction components glide by each other on long-lasting PTFE protection, reducing wear as much as 30 to 90%.

Safe, effective protection

As a manufacturer committed to advanced PTFE treatment technology, QMI provides PTFE that suspend easily in carrier oils and pass readily through standard filters. Many years
of product development efforts produced SX-6000, a metal preparation, blending, suspension and bonding formula exclusive to QMI, with specialized PTFE especially chosen for
higher tensile strength and greater fracture resistance.

Also, QMI treatment does not contain chlorine or other potentially harmful components, does not compromise oil characteristics or component critical tolerances, and is Sequence IIIE
tested safe and effective. Does not cause slippage of automatic transmission metal-to-fiber clutch disks and bands.

Applications

Recommended for automatic transmissions in automobiles, light trucks and similar vehicles. Treatment is applied with current use automatic transmission fluid (ATF), or at ATF
change interval.

Directions

1. Shake well and add to ATF in automatic transmission. Do not overfill.
2. Drive immediately for 30 minutes.
3. Follow manufacturer’s service recommendations.
4. Retreat every 50,000 miles/80,000 km., or when changing ATF.

Usage Ratio

1 part QMI to 20 parts ATF.

(If applying QMI Automatic Transmission Treatment 8 ounce container, apply full contents to automotive or light truck transmission.)