LubriSilk Gun Oil - Firearms CLP Lubricant

You will never use anything else for your firearms after you try LubriSilk Gun Oil!

Used in the military, special-ops and sharp shooting for its superior results in heat reduction, increased velocity, minimal maintenance and surface protection.  LubriSilk Gun Oil achieves greater results than Teflon™, dry graphite, Armalube™, Pro Tec™ gun oil, Militec-1™ and Tetra™ gun lubricants because of the US patented Boron-CLS-Bond™ technology.  Boric Oxide removes all surface contaminates and bonds a near diamond-hard solid lubricant surface.  The surface friction coefficient is under 0.01, resulting in an 80% reduction in friction. 

LubriSilk Gun Oil will eliminate and protect against corrosion 100%.

Easy process to apply as no barrel heating is required. 

Apply LubriSilk Gun Oil with a swab and let set for 24 hours then wipe clean.  Depending on the condition of the barrel, more time to remove all build-up may be required.

Features & Benfits:

• Removes all carbon, rust, corrosion & burnt powder
• Cleans, Lubricates & Protects (CLP)
• Protects bore from carbon and residue buildup
• Eliminates "leading" due to surface roughness 
• Dramatically reduces amintenance
• Increases velocity
• Military specified
• Reduces heat
• Eliminates jamming
• Protects against corrosion 100%
• Forms a surface 85% the hardness of a diamond
• Does Not Contain Chlorine which is highly corrosive and is not labeled as an ingredient in many products since it is classified as a gas

Before & After pictures Walther PPK .380ACP

Applied LubriSilk Gun Oil before shooting, left it untouched overnight.  Wiped it with a cloth the next day (without using any metal brush or solvent).